Today we mounted the Toro 12.5hp flathead engine onto my yardmachines carcass of crap. I had to modify the front hood bracket to accommodate the toro muffler set up. I had to bypass the safety switches and rewire a new fuse holder. Removed the deck and attached the double stack pulley. Installed a new battery and throttle lever and cable. Installed a new fuel line and filter. Took a test drive on my driveway and it runs and drives well. Next we will address the mower deck which appears to be seized.
Hey everyone, I’ve had a bunch of people ask for T-shirts but I seriously doubted anyone would want one. I’m testing the waters with this campaign. If I don’t sell at least 5, no one will get charged for your order. If at least 5 of you order, they’ll be made and sent out to ya, and I’ll know to continue with it. Help me see if there’s enough interest for merch! I have cool colors with my logo on both front and back, with “CLEAN YOUR SHIT!” on the back!
I picked this yard tractor for free as the owner said both connecting rods were broken. I removed the engine and flipped it upside down and removed the sump cover to discover the condition of the connecting rods. Can this engine be saved?
thanks to @isavetractors for the #isavetractors hat and
@GriffinLawnService for the awesome #griffinlawnservice jacket.
#kohler vtwin 25hp
here is the episode where I get a another engine mounted on this tractor to run!
********************************************
If you’d like your product or SWAG (hats, tshirts,hoodies, jackets etc) to be featured, reviewed, or have me wear your company apparel in one of my videos, feel free to send it to me. I’ll give you a shout out as well as include your website url in the video description.
My free Murray Lawn Tractor riding mower when started, sometimes the starter continues to spin because then energized plunger on the solenoid sticks in the energized position until you hit it with a screwdriver to disengage the plunger. To fix this issue, I just replaced the solenoid with a new one. There is an access cover under the dashboard of the tractor that you can remove and gain full access to the solenoid. The tractor had a 3 post solenoid which I had in stock and simply replaced it. Everything works as it should now. I also spent some time inserting inner tubes and fixing wheels with slow leaks from dry rot and cracks in the tires. I also took 6 broken starters and made 2 working ones.
In this 2nd episode of my GT6000 garden tractor, I flip it on its side to inspect why this thing doesnt steer. Not only is the sector missing 3 teeth, but the rack and pinion swivel shaft is also seized from years and years of rust build up. I disassemble the entire steering assembly to get it to steer again.
********************************************
If you’d like your product or SWAG (hats, tshirts,hoodies, jackets etc) to be featured, reviewed, or have me wear your company apparel in one of my videos, feel free to send it to me. I’ll give you a shout out as well as include your website url in the video description.
This was a free lawn tractor I got locally without an engine, it was designed to have a 17hp kohler with a rear gas tank using a fuel pump delivery system. I put a 9hp kawasaki engine from a rear engine from a john deere rx75 riding mower on it. It wasnt designed to have a fuel pump and the pulse from the breather wasnt strong enough to deliver gas from the rear all the way to the front. I tried 3 fuel pumps including an electric one…none of them worked well enough to allow the engine to run correctly, either it was starving for fuel or it flooded the carburetor.
After installing the engine from my craftsman LTV10 lawn tractor, I received my new flywheel, after installed it doesnt seem to charging at full 12 volts. As suspected, the stator was damaged from the DYT4000, therefore, I had to order a new stator. While I wait for it to arrive, I live up and free the pulleys and spindles on the mower deck and install it. Aside from the stator, this tractor is now alive again. I will sell this along with the matching dump trailer and install the snow plow on my GT6000.
Couple days ago I was driving around in town and I noticed an old riding mower sitting by the dumpster at a repair shop. They were closed at the time so I had to wait and go back the next day. Went back and asked about it and they said if I wanted it I could have it! So I ran back to the house and got a trailer and loaded her up! She fired right up when I tried starting it but she wouldnt go into gear. Quick look I saw the drive belt had come off. Easy fix, but then i noticed an even bigger issue! Wont be hard to fix though. I’ll get it cleaned up and sell it for a profit! Dont forget to subscribe to the channel to see more things like this!
Repairing / fixing up a John Deere ride on lawn tractor.
Thank you to my Patrons
https://www.patreon.com/daggerwin
Music by Epidemic Sound
Fixing and using a free aerator with my Allis chalmers 716h
In a previous episode, I attempt to weld blobs of flux metal to replace 3 missing teeth on my steering sector gear. While it worked for a while, the torque of steering merely grinded down the teeth that were meant to be cast iron strength. The stock original steering sector is extremely rare and hard to find. I did find one for $120 which I wasnt willing to pay. There were similar gears that are attached to a different linkage but I grinded the rivets off and welded onto my linkage. The part only cost $25 and now my steering is just like new.
I picked another free lawn tractor with trailer. The engine runs but there may be an issue with the transmission as it’s very hard to shift. It did not come with a battery and the steeri g sector may have stripped teeth. Nevertheless, the tractor has a working engine and has good wheels which I could always use should I scrap it. I will get it running though and figure out if it’s a salvageable tractor after I do an engine swap on the other free Craftsman LT1500 I got the other day. One tractor resurrection at a time.
In the past month I picked up two lawn tractors a poulan and a Craftsman one showing with the Murray already fixed up already at this some other issues I have to fix with it so today I will show a triage of the other two tractors and I got for free and show you what they need to get running again or at least one of them to get running again hope you enjoy.
In this video, I share my experiences with a free Craftsman lawn mower that I found on the side of the road. The Mower is a Craftsman with a 7.25hp Briggs Engine.
The previous owner had trashed it because it had a sheared blade bolt prohibiting the attachment of a blade. We extract the sheared blade bolt by drilling it out and replace the following parts:
Husqvarna Blade Adapter 581473301
Husqvarna Blade Bolt 532851074
Husqvarna Washer 532851084
Husqvarna Lock Washer 539990118
In addition, we gave the unit a general tune up including an oil change, a new air filter, and a new spark plug. We cleaned the unit up and prepared it for a quick sale on Facebook Marketplace.
After the engine repower install, the fuel adjustment screw broke off this my not being able to adjust the fuel mixture. I summarily decided to swap out the carb for the original Scott Keller engine carburetor.
The engine surged quite a bit and wouldnt idle well so the carb swap was a must. The oil was terrible, one of the worst I’ve ever seen and it needed a change. Some of my subscribers told me to adjust the valves however, I didnt feel the need to, but nonetheless, I did it and it needed a small adjustment. The headlight harness was not hooked up so I installed the headlights and cleaned the lenses. I also installed a fuel shut off valve because it is a gravity fed gas tank and it ensures gas will not over flow to the crankcase. I do suspect the needle is not seating correctly and I may have to take the carb apart again. The combustion chamber flooded with gas and in had to relieve it by removing the spark plug and cranking it to blow the hydro lock out to start.
I got this tractor for free after I sold my $100 trailer to this guy Tom for $40. The tractor looked rough and my initial assessment was that this would be a pain to get running again. Much to my surprise, this was a super easy diagnosis and repair. All it needed was an oil change to extract the contaminated oil and replace with new fresh SAE 30 oil supplies by Lucas Oil Products.
It did need a new fuel line and I added a new fuel filter and fuel shut off valve from ProPartsDirect.net
I cleaned it up and adjusted the carburetor, and fixed the lights. Everything else was in good order.
I found this lawn mower on the side of the road for FREE. See how if I can restore this old lawn mower back to peak running condition with no money and how to give a lawnmower a complete tuneup and detail.
Tools I used in this video:
Oil vacuum pump – new updated version here: https://amzn.to/2WpTtUB
Seafoam carburetor cleaner/lube here: https://amzn.to/2YPIdym
Biodegradeable cleaner: https://amzn.to/2WpTZC1
Check me out on Instagram for great photos and more project updates
https://www.instagram.com/silvercymbal/
On top of selling my Cub Cadet for $300, I pieced together a cracked hood and fabricated brackets to remount to the tractor and welded the mower deck of its rotted areas with sheet metal. To smooth out the sharp edges, I applied some JB Weld and wait for it to cure overnight.
********************************************
If you’d like your product or SWAG (hats, tshirts, hoodies, jackets, stickers etc.) to be featured, reviewed, or have me wear your company apparel in one of my videos, feel free to send it to me. I’ll give you a shout out as well as include your website url in the video description.
I got this carcass of crap from my friend Nick from Medford. This LT1000 is a hydrostatic lawn tractor and is rusty but not rotted. The deck is intact and complete. The front transaxle was bent and fortunately I had spare parts to repair the entire front end. Given, the repair went so well, I’m inclined to continue use with the rebuilding of this tractor to operational. It would be a good challenge.
********************************************
If you’d like your product or SWAG (hats, tshirts, hoodies, jackets, stickers etc.) to be featured, reviewed, or have me wear your company apparel in one of my videos, feel free to send it to me. I’ll give you a shout out as well as include your website url in the video description.
I picked this free mower up along with another one off the street thanks to a tip from my friend Quinn “The Mailman”.
The mower was apart and the previous owner had recoiled the engine cover backwards. I repaired the recoil starter, but turns out the engine had a blown connecting rod.
I attempt to fix up and start a 1975 Sears lawn tractor that I got for free on Craigslist.
Instagram: https://instagram.com/waldowelds/
OTC compression tester: https://amzn.to/330Hpw1
Compact, powerful impact wrench: https://amzn.to/2ZYJvcG
Grease gun that I use: https://amzn.to/3gxdNJY
Any purchases you make using the links provided help to support the channel at no extra cost to you! As an Amazon Associate I earn from qualifying purchases.
My brakes felt like they were always rubbing, so much that they were smoking. I think I had the brake pads adjustment nut too tight. tou can adjust the tension without removing the wheel.
********************************************
If you’d like your product or SWAG (hats, tshirts, hoodies, jackets, stickers etc.) to be featured, reviewed, or have me wear your company apparel in one of my videos, feel free to send it to me. I’ll give you a shout out as well as include your website url in the video description.
The repowered engine had an attached muffler so I removed the original stock muffler out of the bottom cradle as well as the not needed heat shield.
I repaired the shifter quadrant because the 2 bottom plastic tabs were broken and was loose. I fabricated some tabs and it’s good as new.
Shined it up with some ATF fluid.
********************************************
If you’d like your product or SWAG (hats, tshirts, hoodies, jackets, stickers etc.) to be featured, reviewed, or have me wear your company apparel in one of my videos, feel free to send it to me. I’ll give you a shout out as well as include your website url in the video description.
After my hand injury, it bothered me that I screwed up that main jet accident and I wasnt able to get that carburetor going. While my hand still hurts, I think my ultrasonic cleaner and help me a bit. I screwed that main jet back in and blew out the holes with @lucasoil brake parts cleaner and dunked the carb into my ultrasonic cleaner. I blew out all the holes again with an air compressor and guess what? Will it run?
********************************************
If you’d like your product or SWAG (hats, tshirts, hoodies, jackets, stickers etc.) to be featured, reviewed, or have me wear your company apparel in one of my videos, feel free to send it to me. I’ll give you a shout out as well as include your website url in the video description.
Another local Huntington long island NY wrencher Brian texted me and asked of I wanted his Murray lawn tractor and old snowblower as he was cleaning up his garage. I said sure and went to pick them up. I also got the troy bilt hood panel in the mail and installed it. I also got the correct engine cover from Brian.
update: sold spirit snowblower as is for $50
sold Murray select lawn tractor
03/12/2020 for $325 to Joe from Farmingdale
********************************************
If you’d like your product or SWAG (hats, tshirts, hoodies, jackets, stickers etc.) to be featured, reviewed, or have me wear your company apparel in one of my videos, feel free to send it to me. I’ll give you a shout out as well as include your website url in the video description.
